Hitachi ZX200 vs Komatsu PC200 - which to buy?
Both the Hitachi ZX200 and Komatsu PC200 are proven 20-tonne-class excavators, but the better choice depends on your job site, budget, and local support. The Komatsu PC200 generally offers slightly better fuel efficiency and a wider global dealer network, while the Hitachi ZX200 is known for robust hydraulic power and smooth control. At ExcaYard, we source, inspect, and ship both models worldwide, so you can compare real machines with confidence.
Key Specifications and Performance
Both machines fall into the 20-22 tonne operating weight class, but they differ in engine, hydraulic system, and digging forces. The table below summarises typical specs for used units we handle. Actual figures vary by year and configuration.
| Feature | Hitachi ZX200 | Komatsu PC200 |
|---|---|---|
| Operating weight (typical) | 19.5 – 21.0 t | 19.0 – 20.5 t |
| Engine (common) | Isuzu 4HK1X | Komatsu SAA6D107E-1 |
| Bucket digging force | ~142 kN | ~138 kN |
| Fuel consumption (typical) | 15 – 18 L/h | 14 – 17 L/h |
| Hydraulic system | Open-centre load sensing | Closed-centre load sensing |
Komatsu's closed-centre system often gives finer control and lower fuel burn, while Hitachi's open-centre design is simpler to maintain in remote areas. Both are reliable when properly serviced.
Condition and the 150-Point Inspection
Used excavators vary widely in condition. ExcaYard performs a 150-point pre-shipment inspection on every machine. This includes checking the undercarriage, hydraulic pumps, engine blow-by, swing bearing, and electrical systems. We verify actual working hours and use paint-thickness gauges to detect hidden repairs or repainting. You receive a full photo and video report before shipment. This process is identical for both Hitachi and Komatsu, so you can compare apples to apples.
When evaluating a ZX200 or PC200, pay special attention to the hydraulic pump and final drives. These are the most expensive components to replace. Our inspection flags any abnormal wear, and we can source replacement parts if needed.
Price Factors and Typical Ranges
Prices for used ZX200 and PC200 units depend on year, hours, condition, and attachments. As a rough guide, well-maintained machines from 2010–2015 with 6,000–10,000 hours typically range from USD 35,000 to USD 55,000 FOB China. Newer models or low-hour units can exceed USD 70,000. The table below shows indicative price factors we consider.
| Factor | Impact on Price |
|---|---|
| Year of manufacture | Newer = higher |
| Working hours | Lower = higher |
| Undercarriage condition | Good = higher |
| Hydraulic pump health | Rebuilt = lower |
| Attachments (breaker, thumb, etc.) | Added value |
Komatsu PC200 often commands a slightly higher resale price due to brand demand, but Hitachi ZX200 can be a better value if local dealer support is strong.
Shipping, Ports, and Lead Time
ExcaYard ships from major Chinese ports: Shanghai, Ningbo, Qingdao, and Tianjin. We offer FOB or CIF terms. For a 20-tonne excavator, you can choose RoRo (roll-on/roll-off), container (if dismantled), or flat-rack. RoRo is most common for complete machines. Typical CIF lead time is 28–45 days port-to-port, depending on destination and vessel schedule. For example, shipping to Lagos, Nigeria, usually takes 35–40 days. To Mombasa, Kenya, about 30–35 days. We handle all loading and lashing.
If you are shipping to Ghana, see our guide on shipping a used Hitachi excavator to Ghana. For container sharing options on smaller machines, check container sharing for mini excavators.
Documents and Certifications
We provide a full set of export documents: commercial invoice, packing list, bill of lading, and certificate of origin. For destination-specific clearance, we handle SONCAP (Nigeria), SABER (Saudi Arabia), PVoC (Kenya, Tanzania, Ghana), GSA (Ghana), and KEBS (Kenya). These certifications ensure your machine clears customs without delays. We do not invent certificates; we work with accredited agencies to obtain the required paperwork for your country.
Payment Terms
We accept T/T USD wire transfer, L/C through Bank of China, and Wise. Typically, we require a 30% deposit to initiate inspection and booking, with the balance before shipment. L/C terms are available for larger orders. All payments are secure and documented.
Frequently asked questions
Which is better for fuel efficiency, Hitachi ZX200 or Komatsu PC200?
Komatsu PC200 generally has a slight edge in fuel efficiency due to its closed-centre hydraulic system. However, actual consumption depends on operator skill and job site conditions. Both machines are comparable in real-world use.
Can ExcaYard provide a warranty on used excavators?
We do not offer a standard warranty, but our 150-point inspection ensures you know the machine's condition before purchase. We can also help you source spare parts and provide technical advice after delivery.
How long does it take to ship a ZX200 or PC200 to Africa?
Typical CIF lead time is 28–45 days port-to-port. For example, to Lagos, Nigeria, expect 35–40 days; to Mombasa, Kenya, 30–35 days. We handle all logistics and keep you updated.
Ready to compare available Hitachi ZX200 and Komatsu PC200 units? Browse our current stock or contact our export desk on WhatsApp +86 193 9277 7259 for a tailored quote.
