Used Komatsu PC360 from China for Export to Thailand (2026 Spec, Price, Shipping)

The Komatsu PC360 is a 30-ton-class used excavator that ExcaYard sources, inspects and ships from China to Thailand. This 2026 guide covers the honest price band from China yards, the Laem Chabang import path and standard import clearance, the shipping options, and the inspection points that separate a working machine from a yard statistic.

Komatsu PC360 in one paragraph

Komatsu PC360 is a Komatsu 30-ton-class hydraulic excavator. ExcaYard keeps it among the 30-ton machines it exports across Southeast Asia and beyond. In 2026 the Komatsu PC360 trades at roughly USD $48,000–$92,000 FOB Shanghai depending on year and hours. Mining support, heavy earthwork and large quarry production is its natural work, and its japanese parts story is a key reason buyers keep coming back to it.

Why Thailand buyers pick the Komatsu PC360 in 2026

Four concrete reasons the Komatsu PC360 is a common import into Thailand for general construction contractors in 2026:

• The Laem Chabang import path is proven: Thailand buyers clear this machine through Laem Chabang on a 10–16 days sea route, under the standard import requirement. The route is well-travelled, so forwarding and clearance are predictable.
• The price lands in the Southeast Asia budget band: at USD $48,000–$92,000, the Komatsu PC360 sits where Southeast Asia contractors and general construction contractors actually buy, rather than where they only browse.
• Komatsu machines hold resale value better than almost anything else in the segment, which matters to buyers who trade up every few years.
• The machine fits Thailand work: a 30-ton excavator is the right tool for mining support, heavy earthwork and large quarry production, which is exactly the work general construction contractors in Thailand run every week.

Where the Komatsu PC360 falls short

Honest trade-offs the Thailand buyer should accept before deposit:

• You pay an acquisition premium up front: the Komatsu name and parts network cost real money at purchase. The premium only pays back if you use the machine hard and keep it long enough.
• Used hours are the real risk: a tampered hour meter or a machine that spent its life in hard quarry duty can look identical to a clean one in photos. Verification is a must, not an option.
• Condition varies far more than year: two Komatsu PC360 machines of the same build year can be 40% apart in true value depending on undercarriage and hydraulic history. Judge the individual machine, not the model reputation.

2026 used market prices from China yards

Honest USD pricing for export-ready Komatsu PC360 from Shanghai, Ningbo, Qingdao and Tianjin yards in 2026. These bands are approximate — a specific machine’s number depends on its year, hours and undercarriage:

• Higher hours, fair condition: approximately $48,000–$62,500 FOB Shanghai. Expect visible wear and budget for immediate service work after landing.
• Mid hours, good condition: approximately $62,500–$77,000 FOB Shanghai. This is the sweet spot most ExcaYard stock falls into — work-ready with a service log.
• Low hours, very good condition: approximately $77,000–$92,000 FOB Shanghai. Recent service history, strong undercarriage, minor cosmetic wear.

Add freight and import clearance to reach a landed cost — see the shipping and landed-cost sections below. For a live number on today’s stock, browse current inventory or send us a spec brief on WhatsApp.

Four hard inspection points before deposit

These are the checks (part of ExcaYard’s 150-point report) that catch the most expensive surprises on a used Komatsu PC360:

1. Engine condition: cold-start smoke, blow-by and any oil or coolant leaks tell you more than the hour meter does. Insist on a cold-start video and a compression check for the class of machine you are buying.

2. Hydraulic system: test cycle speed, look for cylinder drift with a loaded bucket, and read the hose date codes. A machine with original hoses beyond service life will cost you a full hose pack shortly after landing.

3. Undercarriage: measure track, sprocket and idler wear. Undercarriage condition is the single biggest variable between two units of the same year and is the easiest place for a yard to hide real wear.

4. Paint thickness and structure: a paint gauge across the boom, arm and counterweight reveals prior damage or repair. Factory paint should read consistent; a patched area reads thicker.

5. Hours verification: cross-check the ECU reading against the service log and physical wear. Hour-meter rollback is the most common fraud in the China export market — see our hours-verification guide.

Laem Chabang import process and standard import

Thailand requires every imported used machine to clear standard customs and, where applicable, a local conformity or registration check before it can be put to work. The Komatsu PC360 follows the same path as any other used excavator:

1. The yard prepares the machine and photographs the serial plate, engine number and chassis VIN.

2. An inspection company (Intertek, SGS or Bureau Veritas) books a physical visit to the China yard, with a 5–7 working day lead time.

3. The inspector verifies condition and issues the conformity document required for Thailand clearance at Laem Chabang.

4. ExcaYard handles the documentation chain as part of standard service — confirm any other yard does the same before you commit a deposit.

Shipping options and transit times

Two practical options for Shanghai → Laem Chabang in 2026:

• RoRo (Roll-on / Roll-off): the Komatsu PC360 is loaded under its own power onto a vehicle carrier. Lower cost and simpler for working machines, transit approximately 10–16 days.
• Container: for higher-spec or near-new units, the boom and arm are partially detached into a flat-rack or 40-ft high-cube. Slightly slower and more expensive, but better protected.

Confirm loading dimensions with the yard before booking, especially for the 30-ton class.

Payment, deposit, and total landed cost

ExcaYard accepts the same payment methods for the Komatsu PC360 as for other models: T/T USD wire (Bank of China / SWIFT), Wise, L/C through Bank of China for 3+ machine orders, and CNY direct via Hong Kong settlement.

A typical landed cost for a mid-band Komatsu PC360 into Thailand in 2026 stacks up as:

• FOB Shanghai: the machine price from the bands above
• Freight to Laem Chabang: quoted per route, RoRo, container or overland
• Import conformity / certification: per the standard import requirement
• Customs duty and VAT: set by Thailand tariff schedule — confirm the exact rate with your clearing agent at purchase
• Terminal handling and last-mile transport to site

For a firm all-in number on today’s stock, see our payment-terms guide or send us a spec brief on WhatsApp — we return a 24-hour CIF quote with real numbers.

FAQ

How many hours is too many on a used Komatsu PC360?

For a fair-condition Komatsu PC360 bought for Thailand work in 2026, treat anything materially above its class-normal overhaul point as parts-donor value. The sweet spot is mid-hours with a verified service log, original hydraulics and undercarriage above 55%. Hours are only meaningful when verified against the ECU and physical wear — see our verification guide.

What condition band should I budget for the Komatsu PC360 in Thailand?

If your Thailand operation runs the machine hard, budget for the good-condition band rather than the cheapest fair-condition unit — the upfront saving is usually erased by immediate rebuild work. For lower utilization, a fair-condition machine with a strong undercarriage is a rational buy.

What does standard import clearance actually involve for Thailand?

standard import is a pre-shipment conformity check — an approved inspector verifies the machine at the China yard before it sails, so it clears Laem Chabang without being held. ExcaYard runs this documentation in-house for Thailand imports.

Is the Komatsu PC360 a sensible choice for general construction contractors in Thailand?

For the median general construction contractors in Thailand, the Komatsu PC360 is a defensible 2026 acquisition: it matches the local work profile, clears through Laem Chabang on a proven route, and its price band lines up with what Thailand buyers actually spend. The decision turns on your annual utilization and how long you plan to hold the machine.

Next step

If you are evaluating a Komatsu PC360 for your 2026 Thailand project, ExcaYard runs verified yard inventory with daily updated stock photos and inspection reports. Talk to us on WhatsApp at +86 193 9277 7259 with your spec brief (year, hours, undercarriage, pump condition, budget, destination port) and we will match against current stock within one working day.

References

• Komatsu official excavator range — manufacturer reference for the Komatsu PC360 class.
• ISO 9001 quality management — the inspection framework behind the 150-point pre-shipment report.

These sources support the port, certification and tariff claims in this guide. They are authority references, not commercial competitors.