Used Komatsu PC200-8M0 from China for Export to Kazakhstan (2026 Spec, Price, Shipping)

The Komatsu PC200-8M0 is a 20-ton-class used excavator that ExcaYard sources, inspects and ships from China to Kazakhstan. This 2026 guide covers the honest price band from China yards, the Khorgos overland / Aktau import path and EAEU customs clearance, the shipping options, and the inspection points that separate a working machine from a yard statistic.

Komatsu PC200-8M0 in one paragraph

Komatsu PC200-8M0 is a Komatsu 20-ton-class hydraulic excavator. ExcaYard keeps it among the 20-ton machines it exports across CIS and beyond. In 2026 the Komatsu PC200-8M0 trades at roughly USD $26,000–$55,000 FOB Shanghai depending on year and hours. Road building, general earthmoving, quarry support and foundation work is its natural work, and its japanese parts story is a key reason buyers keep coming back to it.

Why Kazakhstan buyers pick the Komatsu PC200-8M0 in 2026

Four concrete reasons the Komatsu PC200-8M0 is a common import into Kazakhstan for mining and infrastructure contractors in 2026:

• The Khorgos overland / Aktau import path is proven: Kazakhstan buyers route this machine overland via Khorgos overland / Aktau on a 18–25 days route, under the EAEU customs requirement. The route is well-travelled, so forwarding and clearance are predictable.
• The price lands in the CIS budget band: at USD $26,000–$55,000, the Komatsu PC200-8M0 sits where CIS contractors and mining and infrastructure contractors actually buy, rather than where they only browse.
• Komatsu machines hold resale value better than almost anything else in the segment, which matters to buyers who trade up every few years.
• The machine fits Kazakhstan work: a 20-ton excavator is the right tool for road building, general earthmoving, quarry support and foundation work, which is exactly the work mining and infrastructure contractors in Kazakhstan run every week.

Where the Komatsu PC200-8M0 falls short

Honest trade-offs the Kazakhstan buyer should accept before deposit:

• You pay an acquisition premium up front: the Komatsu name and parts network cost real money at purchase. The premium only pays back if you use the machine hard and keep it long enough.
• Used hours are the real risk: a tampered hour meter or a machine that spent its life in hard quarry duty can look identical to a clean one in photos. Verification is a must, not an option.
• Condition varies far more than year: two Komatsu PC200-8M0 machines of the same build year can be 40% apart in true value depending on undercarriage and hydraulic history. Judge the individual machine, not the model reputation.

2026 used market prices from China yards

Honest USD pricing for export-ready Komatsu PC200-8M0 from Shanghai, Ningbo, Qingdao and Tianjin yards in 2026. These bands are approximate — a specific machine’s number depends on its year, hours and undercarriage:

• Higher hours, fair condition: approximately $26,000–$35,600 FOB Shanghai. Expect visible wear and budget for immediate service work after landing.
• Mid hours, good condition: approximately $35,600–$45,100 FOB Shanghai. This is the sweet spot most ExcaYard stock falls into — work-ready with a service log.
• Low hours, very good condition: approximately $45,100–$55,000 FOB Shanghai. Recent service history, strong undercarriage, minor cosmetic wear.

Add freight and import clearance to reach a landed cost — see the shipping and landed-cost sections below. For a live number on today’s stock, browse current inventory or send us a spec brief on WhatsApp.

Verified in stock now — 5 Komatsu PC200-8M0 units in ExcaYard China yards (year · hours · grade):

• 2020 Komatsu PC200-8M0 · Grade A
• 2020 Komatsu PC200-8M0 · 3,600 hrs · Grade A
• 2019 Komatsu PC200-8M0 · 6,500 hrs · Grade A
• 2019 Komatsu PC200-8M0 · Grade A
• View all 5 Komatsu PC200-8M0 units in stock →

Four hard inspection points before deposit

These are the checks (part of ExcaYard’s 150-point report) that catch the most expensive surprises on a used Komatsu PC200-8M0:

1. Engine condition: cold-start smoke, blow-by and any oil or coolant leaks tell you more than the hour meter does. Insist on a cold-start video and a compression check for the class of machine you are buying.

2. Hydraulic system: test cycle speed, look for cylinder drift with a loaded bucket, and read the hose date codes. A machine with original hoses beyond service life will cost you a full hose pack shortly after landing.

3. Undercarriage: measure track, sprocket and idler wear. Undercarriage condition is the single biggest variable between two units of the same year and is the easiest place for a yard to hide real wear.

4. Paint thickness and structure: a paint gauge across the boom, arm and counterweight reveals prior damage or repair. Factory paint should read consistent; a patched area reads thicker.

5. Hours verification: cross-check the ECU reading against the service log and physical wear. Hour-meter rollback is the most common fraud in the China export market — see our hours-verification guide.

Khorgos overland / Aktau import process and EAEU customs

Kazakhstan requires every imported used machine to clear EAEU customs before release. The Komatsu PC200-8M0 follows the same process as any other used excavator:

1. The yard prepares the machine and photographs the serial plate, engine number and chassis VIN.

2. An inspection company (Intertek, SGS or Bureau Veritas) books a physical visit to the China yard, with a 5–7 working day lead time.

3. The inspector verifies condition and issues the conformity document required for Kazakhstan clearance at Khorgos overland / Aktau.

4. ExcaYard handles the documentation chain as part of standard service — confirm any other yard does the same before you commit a deposit.

Shipping options and transit times

The standard route for the Komatsu PC200-8M0 into Kazakhstan in 2026 is overland:

• Container to Khorgos: the machine ships containerized from Shanghai or Ningbo to the Khorgos border crossing, then transfers to a low-loader truck.
• Truck / rail on-carriage: from Khorgos the final leg runs overland to the destination site — approximately 18–25 days door-to-door.

Confirm the final on-carriage with the yard before booking; overland clearances and transfer fees vary by destination.

Payment, deposit, and total landed cost

ExcaYard accepts the same payment methods for the Komatsu PC200-8M0 as for other models: T/T USD wire (Bank of China / SWIFT), Wise, L/C through Bank of China for 3+ machine orders, and CNY direct via Hong Kong settlement.

A typical landed cost for a mid-band Komatsu PC200-8M0 into Kazakhstan in 2026 stacks up as:

• FOB Shanghai: the machine price from the bands above
• Freight to Khorgos overland / Aktau: quoted per route, RoRo, container or overland
• Import conformity / certification: per the EAEU customs requirement
• Customs duty and VAT: set by Kazakhstan tariff schedule — confirm the exact rate with your clearing agent at purchase
• Terminal handling and last-mile transport to site

For a firm all-in number on today’s stock, see our payment-terms guide or send us a spec brief on WhatsApp — we return a 24-hour CIF quote with real numbers.

FAQ

How many hours is too many on a used Komatsu PC200-8M0?

For a fair-condition Komatsu PC200-8M0 bought for Kazakhstan work in 2026, treat anything materially above its class-normal overhaul point as parts-donor value. The sweet spot is mid-hours with a verified service log, original hydraulics and undercarriage above 55%. Hours are only meaningful when verified against the ECU and physical wear — see our verification guide.

What condition band should I budget for the Komatsu PC200-8M0 in Kazakhstan?

If your Kazakhstan operation runs the machine hard, budget for the good-condition band rather than the cheapest fair-condition unit — the upfront saving is usually erased by immediate rebuild work. For lower utilization, a fair-condition machine with a strong undercarriage is a rational buy.

What does EAEU customs clearance actually involve for Kazakhstan?

EAEU customs is a pre-shipment conformity check — an approved inspector verifies the machine at the China yard before it sails, so it clears Khorgos overland / Aktau without being held. ExcaYard runs this documentation in-house for Kazakhstan imports.

Is the Komatsu PC200-8M0 a sensible choice for mining and infrastructure contractors in Kazakhstan?

For the median mining and infrastructure contractors in Kazakhstan, the Komatsu PC200-8M0 is a defensible 2026 acquisition: it matches the local work profile, clears through Khorgos overland / Aktau on a proven route, and its price band lines up with what Kazakhstan buyers actually spend. The decision turns on your annual utilization and how long you plan to hold the machine.

Next step

If you are evaluating a Komatsu PC200-8M0 for your 2026 Kazakhstan project, ExcaYard runs verified yard inventory with daily updated stock photos and inspection reports. Talk to us on WhatsApp at +86 193 9277 7259 with your spec brief (year, hours, undercarriage, pump condition, budget, destination port) and we will match against current stock within one working day.

References

• Komatsu official excavator range — manufacturer reference for the Komatsu PC200-8M0 class.
• Eurasian Economic Commission — EAEU customs — conformity authority for the EAEU customs import requirement.
• ISO 9001 quality management — the inspection framework behind the 150-point pre-shipment report.

These sources support the port, certification and tariff claims in this guide. They are authority references, not commercial competitors.