Used Caterpillar 320GC from China for Export to Nigeria (2026 Spec, Price, Shipping)

The Caterpillar 320GC is a 20-ton-class used excavator that ExcaYard sources, inspects and ships from China to Nigeria. This 2026 guide covers the honest price band from China yards, the Lagos / Tin Can import path and SONCAP clearance, the shipping options, and the inspection points that separate a working machine from a yard statistic.

Caterpillar 320GC in one paragraph

Caterpillar 320GC is a Caterpillar 20-ton-class hydraulic excavator. ExcaYard keeps it among the 20-ton machines it exports across Africa and beyond. In 2026 the Caterpillar 320GC trades at roughly USD $28,000–$65,000 FOB Shanghai depending on year and hours. Road building, general earthmoving, quarry support and foundation work is its natural work, and its premium parts story is a key reason buyers keep coming back to it.

Why Nigeria buyers pick the Caterpillar 320GC in 2026

Four concrete reasons the Caterpillar 320GC is a common import into Nigeria for construction and quarry operators in 2026:

• The Lagos / Tin Can import path is proven: Nigeria buyers clear this machine through Lagos / Tin Can on a 32–38 days sea route, under the SONCAP requirement. The route is well-travelled, so forwarding and clearance are predictable.
• The price lands in the Africa budget band: at USD $28,000–$65,000, the Caterpillar 320GC sits where Africa contractors and construction and quarry operators actually buy, rather than where they only browse.
• Caterpillar runs the deepest parts and dealer network of any excavator OEM, which matters when a machine is working far from a major port or city.
• The machine fits Nigeria work: a 20-ton excavator is the right tool for road building, general earthmoving, quarry support and foundation work, which is exactly the work construction and quarry operators in Nigeria run every week.

Where the Caterpillar 320GC falls short

Honest trade-offs the Nigeria buyer should accept before deposit:

• You pay an acquisition premium up front: the Caterpillar name and parts network cost real money at purchase. The premium only pays back if you use the machine hard and keep it long enough.
• Used hours are the real risk: a tampered hour meter or a machine that spent its life in hard quarry duty can look identical to a clean one in photos. Verification is a must, not an option.
• Condition varies far more than year: two Caterpillar 320GC machines of the same build year can be 40% apart in true value depending on undercarriage and hydraulic history. Judge the individual machine, not the model reputation.

2026 used market prices from China yards

Honest USD pricing for export-ready Caterpillar 320GC from Shanghai, Ningbo, Qingdao and Tianjin yards in 2026. These bands are approximate — a specific machine’s number depends on its year, hours and undercarriage:

• Higher hours, fair condition: approximately $28,000–$40,200 FOB Shanghai. Expect visible wear and budget for immediate service work after landing.
• Mid hours, good condition: approximately $40,200–$52,400 FOB Shanghai. This is the sweet spot most ExcaYard stock falls into — work-ready with a service log.
• Low hours, very good condition: approximately $52,400–$65,000 FOB Shanghai. Recent service history, strong undercarriage, minor cosmetic wear.

Add freight and import clearance to reach a landed cost — see the shipping and landed-cost sections below. For a live number on today’s stock, browse current inventory or send us a spec brief on WhatsApp.

Verified in stock now — 5 Caterpillar 320GC units in ExcaYard China yards (year · hours · grade):

• 2020 Caterpillar 320GC · 10,000 hrs · Grade B
• 2019 Caterpillar 320GC · 8,500 hrs · Grade B
• 2019 Caterpillar 320GC · Grade B
• 2019 Caterpillar 320GC · 10,600 hrs · Grade B
• View all 5 Caterpillar 320GC units in stock →

Four hard inspection points before deposit

These are the checks (part of ExcaYard’s 150-point report) that catch the most expensive surprises on a used Caterpillar 320GC:

1. Engine condition: cold-start smoke, blow-by and any oil or coolant leaks tell you more than the hour meter does. Insist on a cold-start video and a compression check for the class of machine you are buying.

2. Hydraulic system: test cycle speed, look for cylinder drift with a loaded bucket, and read the hose date codes. A machine with original hoses beyond service life will cost you a full hose pack shortly after landing.

3. Undercarriage: measure track, sprocket and idler wear. Undercarriage condition is the single biggest variable between two units of the same year and is the easiest place for a yard to hide real wear.

4. Paint thickness and structure: a paint gauge across the boom, arm and counterweight reveals prior damage or repair. Factory paint should read consistent; a patched area reads thicker.

5. Hours verification: cross-check the ECU reading against the service log and physical wear. Hour-meter rollback is the most common fraud in the China export market — see our hours-verification guide.

Lagos / Tin Can import process and SONCAP

Nigeria requires every imported used machine to clear SONCAP before release. The Caterpillar 320GC follows the same process as any other used excavator:

1. The yard prepares the machine and photographs the serial plate, engine number and chassis VIN.

2. An inspection company (Intertek, SGS or Bureau Veritas) books a physical visit to the China yard, with a 5–7 working day lead time.

3. The inspector verifies condition and issues the conformity document required for Nigeria clearance at Lagos / Tin Can.

4. ExcaYard handles the documentation chain as part of standard service — confirm any other yard does the same before you commit a deposit.

Shipping options and transit times

Two practical options for Shanghai → Lagos / Tin Can in 2026:

• RoRo (Roll-on / Roll-off): the Caterpillar 320GC is loaded under its own power onto a vehicle carrier. Lower cost and simpler for working machines, transit approximately 32–38 days.
• Container: for higher-spec or near-new units, the boom and arm are partially detached into a flat-rack or 40-ft high-cube. Slightly slower and more expensive, but better protected.

Confirm loading dimensions with the yard before booking, especially for the 20-ton class.

Payment, deposit, and total landed cost

ExcaYard accepts the same payment methods for the Caterpillar 320GC as for other models: T/T USD wire (Bank of China / SWIFT), Wise, L/C through Bank of China for 3+ machine orders, and CNY direct via Hong Kong settlement.

A typical landed cost for a mid-band Caterpillar 320GC into Nigeria in 2026 stacks up as:

• FOB Shanghai: the machine price from the bands above
• Freight to Lagos / Tin Can: quoted per route, RoRo, container or overland
• Import conformity / certification: per the SONCAP requirement
• Customs duty and VAT: set by Nigeria tariff schedule — confirm the exact rate with your clearing agent at purchase
• Terminal handling and last-mile transport to site

For a firm all-in number on today’s stock, see our payment-terms guide or send us a spec brief on WhatsApp — we return a 24-hour CIF quote with real numbers.

FAQ

How many hours is too many on a used Caterpillar 320GC?

For a fair-condition Caterpillar 320GC bought for Nigeria work in 2026, treat anything materially above its class-normal overhaul point as parts-donor value. The sweet spot is mid-hours with a verified service log, original hydraulics and undercarriage above 55%. Hours are only meaningful when verified against the ECU and physical wear — see our verification guide.

What condition band should I budget for the Caterpillar 320GC in Nigeria?

If your Nigeria operation runs the machine hard, budget for the good-condition band rather than the cheapest fair-condition unit — the upfront saving is usually erased by immediate rebuild work. For lower utilization, a fair-condition machine with a strong undercarriage is a rational buy.

What does SONCAP clearance actually involve for Nigeria?

SONCAP is a pre-shipment conformity check — an approved inspector verifies the machine at the China yard before it sails, so it clears Lagos / Tin Can without being held. ExcaYard runs this documentation in-house for Nigeria imports.

Is the Caterpillar 320GC a sensible choice for construction and quarry operators in Nigeria?

For the median construction and quarry operators in Nigeria, the Caterpillar 320GC is a defensible 2026 acquisition: it matches the local work profile, clears through Lagos / Tin Can on a proven route, and its price band lines up with what Nigeria buyers actually spend. The decision turns on your annual utilization and how long you plan to hold the machine.

Next step

If you are evaluating a Caterpillar 320GC for your 2026 Nigeria project, ExcaYard runs verified yard inventory with daily updated stock photos and inspection reports. Talk to us on WhatsApp at +86 193 9277 7259 with your spec brief (year, hours, undercarriage, pump condition, budget, destination port) and we will match against current stock within one working day.

References

• Caterpillar official excavator range — manufacturer reference for the Caterpillar 320GC class.
• SON — Standards Organisation of Nigeria (SONCAP) — conformity authority for the SONCAP import requirement.
• ISO 9001 quality management — the inspection framework behind the 150-point pre-shipment report.

These sources support the port, certification and tariff claims in this guide. They are authority references, not commercial competitors.